Independent platform. We accept no commission or ranking fees from any manufacturer. The source of every technical value is stated in our data policy.

Decision support tool

How big is "2.9 inch", really?

Inches describe the diagonal. What matters on the shelf is width and height — and the same diagonal can mean a completely different label depending on aspect ratio. Calibrate your screen with a bank card and see catalogue labels at true 1:1 size.

27Distinct screen sizes
22,7 × 11,4 mmSmallest
897,8 × 49,3 mmLargest

1. Calibrate your screen

The browser does not know your screen's true physical scale: the CSS "inch" is a nominal unit with no relation to your device's pixel density. So we ask you for the scale.

Hold any bank or ID card against the screen and move the slider until the outline matches the card exactly.

Bank card · 85.60 × 53.98 mm

Not calibrated yet — the scale below is approximate.

Why a bank card?

Why a bank card? The ISO/IEC 7810 ID-1 standard fixes every card worldwide at 85.60 × 53.98 mm — so you carry a millimetre-accurate ruler. Banknotes and coins vary by country and series.

2. Pick a size

Every unique screen size in the catalogue is listed. The same diagonal appearing as separate rows with different aspect ratios is intentional: they really do look different on the shelf.

3. Actual size

Approximate scale — not calibrated
2490
Width
—
Height
—
Diagonal
—
Resolution
—
Pixel density
—
Catalogue records at this size

    Try it on your own shelf

    Seeing it on screen leaves one question open: will this label fit your shelf rail? That measurement is in your store, not in the catalogue.

    Place a bank card on the shelf rail and photograph it straight on. Then drag the two handles to the edge of the card.

    No scale yet — drag the handles to the edge of the card

    The photo never leaves your device: nothing is uploaded and nothing is stored. Close the page and nothing remains.

    The limit of this measurement

    The scale only holds in the plane the card is in. If the card was not placed where the label will sit — held in your hand, closer to the camera — perspective makes the scale wrong. If the photo was taken at an angle, a single-line calibration is off in one axis; that cannot be corrected.

    The figure is the label's SCREEN area, not its body. The housing is always larger and varies by manufacturer.

    This is the screen area, not the label housing.

    The housing is always larger than the screen and varies by manufacturer; since the catalogue holds no housing dimensions, we do not estimate them. The diagonal also comes from the manufacturer's rounded figure: a panel sold as "2.9 inch" is really 2.87". The deviation is about 1%, under a millimetre at typical sizes — it will not change a fit decision, but it is not identical to the datasheet either.

    Ask for exact housing dimensions in writing during the tender; the specification generator includes this clause.

    1 catalogue record(s) could not be measured: diagonal or pixel resolution is not documented. Rather than estimating, they are left out of the list.

    Comparison (0/4)
    Compare

    Free needs analysis — no manufacturer is given priority.

    Request quote